Croatty

manual

1.

Open the box.

2.

Take out the Croatty.

3.

Screw Croatty on mod.

4.

Tighten the Croatty

5.

Attach the driptip.

6.

Use your driptip to remove the topcap.

7.

Remove the topcap.

8.

Remove the Croatty casing

9.

Remove the Croatty casing

10.

Unscrew two cross screws inside the tank.

11.

Remove the tank.

12.

Unscrew top coil screws.

13.

Unscrew side coil screws.

14.

Insert the coil and tighten the screws.

15.

Cut the wires.

16.

Screw safety plastic on.

17.

Heat your coil.

18.

Cut the cotton.

19.

Pull the cotton through the coil.

20.

Cut off the excess cotton.

21.

Tuck the cotton ends in the back of the Croatty.

22.

Add aditional cotton in the back.

23.

Moisturize the cotton.

24.

Attach the Croatty casing.

25.

Take the topcap and unscrew the tank cover.

26.

Attach the cooling unit.

27.

Screw it on the topcap.

28.

Close the Croatty.

29.

Vape on.

16.

Attach the tank.

17.

Screw the two cross screws on.

18.

Heat the coil.

19.

Cut the cotton.

20.

Pull the cotton through the coil and cut off the excess.

21.

Pull the cotton to the tank holes.

22.

Moisturize the cotton.

23.

Prepare a small cotton ball..

24.

Insert the small cotton ball on the tank hole.

25.

Fill up the chamber.

26.

Moisturize the cotton.

25.

Attach the Croatty casing.

26.

Fill up the tank.

27.

Close the Croatty with the topcap.

28.

Vape on.